Calculate the weight of HDPE sheet, rod and pipe for tanks, liners, cutting boards and wear strips. HDPE is preselected at 950 kg/m³; enter your dimensions to get the weight in kg.
Total weight for 1 piece(s)
Your material, shape, dimensions and quantity are carried into the message.
Engineering note: Calculated weights are theoretical estimates based on nominal dimensions and average material densities. Actual weights may vary due to manufacturing tolerances, material composition variations, and specific grades.
Weight is volume multiplied by density. This page uses 950 kg/m³ for HDPE.
| Shape | Volume formula |
|---|---|
| Sheet / Plate | Length x Width x Thickness |
| Round Rod / Bar | 3.1416 x (Diameter / 2)² x Length |
| Pipe / Tube | 3.1416 x ((Outer Diameter / 2)² - (Inner Diameter / 2)²) x Length |
| Square Bar | Width x Height x Length |
| Hex Bar | 0.866 x (Across Flats)² x Length |
| Ring | 3.1416 x ((Outer Diameter / 2)² - (Inner Diameter / 2)²) x Thickness |
| Block / Cube | Length x Width x Height |
Weight (kg) = Volume (m³) x Density (kg/m³). Convert all dimensions to metres before multiplying.
Worked example: A sheet 1000 mm x 1000 mm x 10 mm thick. Volume = 1 x 1 x 0.01 = 0.01 m³. Weight = volume x 950 kg/m³ = about 9.5 kg.
Ready weights for HDPE sheet by thickness, including a full 1220 x 2440 mm (4 x 8 ft) sheet, and for round rod.
| Thickness | Weight per m² | Weight of 1220 x 2440 mm sheet |
|---|---|---|
| 3 mm | 2.85 kg | 8.48 kg |
| 5 mm | 4.75 kg | 14.14 kg |
| 6 mm | 5.70 kg | 16.97 kg |
| 8 mm | 7.60 kg | 22.62 kg |
| 10 mm | 9.50 kg | 28.28 kg |
| 12 mm | 11.40 kg | 33.94 kg |
| 15 mm | 14.25 kg | 42.42 kg |
| 20 mm | 19.00 kg | 56.56 kg |
| 25 mm | 23.75 kg | 70.70 kg |
| 30 mm | 28.50 kg | 84.84 kg |
| 40 mm | 38.00 kg | 113.1 kg |
| 50 mm | 47.50 kg | 141.4 kg |
Theoretical weight of flat sheet at 950 kg/m³.
| Rod diameter | Weight per metre |
|---|---|
| 20 mm | 0.30 kg |
| 25 mm | 0.47 kg |
| 30 mm | 0.67 kg |
| 40 mm | 1.19 kg |
| 50 mm | 1.87 kg |
| 60 mm | 2.69 kg |
| 80 mm | 4.78 kg |
| 100 mm | 7.46 kg |
| 150 mm | 16.79 kg |
| 200 mm | 29.85 kg |
Theoretical weight of solid round rod at 950 kg/m³.
Go further with this material.
About the HDPE weight calculator.
It uses 950 kg/m³ for HDPE, which is an average value. You can type your own density in the Density field if your grade is different.
Work out the volume in cubic metres from the dimensions, then multiply by the density in kg/m³. For example, a sheet 1000 mm x 1000 mm x 10 mm thick has a volume of 0.01 m³, which at 950 kg/m³ weighs about 9.5 kg.
No. It is a theoretical estimate based on nominal dimensions and average density. Actual weight varies with manufacturing tolerances, grade and fillers.
Yes. Use the quote button beside the result to send us the material, shape, dimensions and quantity, or contact our sales team.
Send us your size and quantity and our team will respond with availability and pricing.