Calculate the weight of PEEK rod, sheet and tube for high-temperature and chemically demanding components. PEEK is preselected at 1,320 kg/m³; enter your dimensions to get the weight in kg.
Total weight for 1 piece(s)
Your material, shape, dimensions and quantity are carried into the message.
Engineering note: Calculated weights are theoretical estimates based on nominal dimensions and average material densities. Actual weights may vary due to manufacturing tolerances, material composition variations, and specific grades.
Weight is volume multiplied by density. This page uses 1,320 kg/m³ for PEEK.
| Shape | Volume formula |
|---|---|
| Sheet / Plate | Length x Width x Thickness |
| Round Rod / Bar | 3.1416 x (Diameter / 2)² x Length |
| Pipe / Tube | 3.1416 x ((Outer Diameter / 2)² - (Inner Diameter / 2)²) x Length |
| Square Bar | Width x Height x Length |
| Hex Bar | 0.866 x (Across Flats)² x Length |
| Ring | 3.1416 x ((Outer Diameter / 2)² - (Inner Diameter / 2)²) x Thickness |
| Block / Cube | Length x Width x Height |
Weight (kg) = Volume (m³) x Density (kg/m³). Convert all dimensions to metres before multiplying.
Worked example: A round rod 50 mm in diameter and 1000 mm long. Volume = 3.1416 x 0.025² x 1 = 0.0019635 m³. Weight = volume x 1,320 kg/m³ = about 2.592 kg.
Ready weights for common PEEK rod diameters and sheet thicknesses. PEEK is costly per kg, so an accurate weight helps you check a quotation.
| Rod diameter | Weight per metre |
|---|---|
| 6 mm | 0.04 kg |
| 10 mm | 0.10 kg |
| 16 mm | 0.27 kg |
| 20 mm | 0.41 kg |
| 25 mm | 0.65 kg |
| 30 mm | 0.93 kg |
| 40 mm | 1.66 kg |
| 50 mm | 2.59 kg |
| 60 mm | 3.73 kg |
| 80 mm | 6.64 kg |
| 100 mm | 10.37 kg |
Theoretical weight of solid round rod at 1,320 kg/m³.
| Thickness | Weight per m² |
|---|---|
| 5 mm | 6.60 kg |
| 6 mm | 7.92 kg |
| 8 mm | 10.56 kg |
| 10 mm | 13.20 kg |
| 12 mm | 15.84 kg |
| 15 mm | 19.80 kg |
| 20 mm | 26.40 kg |
| 25 mm | 33.00 kg |
| 30 mm | 39.60 kg |
| 40 mm | 52.80 kg |
| 50 mm | 66.00 kg |
Theoretical weight of flat sheet at 1,320 kg/m³.
Go further with this material.
About the PEEK weight calculator.
It uses 1,320 kg/m³ for PEEK, which is an average value. You can type your own density in the Density field if your grade is different.
Work out the volume in cubic metres from the dimensions, then multiply by the density in kg/m³. For example, a round rod 50 mm in diameter and 1000 mm long has a volume of 0.0019635 m³, which at 1,320 kg/m³ weighs about 2.592 kg.
No. It is a theoretical estimate based on nominal dimensions and average density. Actual weight varies with manufacturing tolerances, grade and fillers.
Yes. Use the quote button beside the result to send us the material, shape, dimensions and quantity, or contact our sales team.
Send us your size and quantity and our team will respond with availability and pricing.