Calculate the weight of rubber sheet in natural rubber, EPDM, neoprene, nitrile, silicone or Viton. Natural Rubber (NR) is preselected at 950 kg/m³; enter your dimensions to get the weight in kg.
Total weight for 1 piece(s)
Your material, shape, dimensions and quantity are carried into the message.
Engineering note: Calculated weights are theoretical estimates based on nominal dimensions and average material densities. Actual weights may vary due to manufacturing tolerances, material composition variations, and specific grades.
Weight is volume multiplied by density. This page uses 950 kg/m³ for Natural Rubber (NR).
| Shape | Volume formula |
|---|---|
| Sheet / Plate | Length x Width x Thickness |
| Round Rod / Bar | 3.1416 x (Diameter / 2)² x Length |
| Pipe / Tube | 3.1416 x ((Outer Diameter / 2)² - (Inner Diameter / 2)²) x Length |
| Square Bar | Width x Height x Length |
| Hex Bar | 0.866 x (Across Flats)² x Length |
| Ring | 3.1416 x ((Outer Diameter / 2)² - (Inner Diameter / 2)²) x Thickness |
| Block / Cube | Length x Width x Height |
Weight (kg) = Volume (m³) x Density (kg/m³). Convert all dimensions to metres before multiplying.
Worked example: A sheet 1000 mm x 1000 mm x 10 mm thick. Volume = 1 x 1 x 0.01 = 0.01 m³. Weight = volume x 950 kg/m³ = about 9.5 kg.
| Rubber compound | Density |
|---|---|
| Natural Rubber (NR) | 950 kg/m³ |
| EPDM | 1,150 kg/m³ |
| Neoprene (CR) | 1,250 kg/m³ |
| Nitrile (NBR) | 1,000 kg/m³ |
| Silicone | 1,200 kg/m³ |
| Viton (FKM) | 1,850 kg/m³ |
Weight in kg per square metre for six rubber compounds. Multiply by the area of your sheet or roll in m².
| Thickness | Natural | EPDM | Neoprene | Nitrile | Silicone | Viton |
|---|---|---|---|---|---|---|
| 1 mm | 0.95 kg | 1.15 kg | 1.25 kg | 1.00 kg | 1.20 kg | 1.85 kg |
| 1.5 mm | 1.43 kg | 1.73 kg | 1.88 kg | 1.50 kg | 1.80 kg | 2.77 kg |
| 2 mm | 1.90 kg | 2.30 kg | 2.50 kg | 2.00 kg | 2.40 kg | 3.70 kg |
| 3 mm | 2.85 kg | 3.45 kg | 3.75 kg | 3.00 kg | 3.60 kg | 5.55 kg |
| 5 mm | 4.75 kg | 5.75 kg | 6.25 kg | 5.00 kg | 6.00 kg | 9.25 kg |
| 6 mm | 5.70 kg | 6.90 kg | 7.50 kg | 6.00 kg | 7.20 kg | 11.10 kg |
| 8 mm | 7.60 kg | 9.20 kg | 10.00 kg | 8.00 kg | 9.60 kg | 14.80 kg |
| 10 mm | 9.50 kg | 11.50 kg | 12.50 kg | 10.00 kg | 12.00 kg | 18.50 kg |
| 12 mm | 11.40 kg | 13.80 kg | 15.00 kg | 12.00 kg | 14.40 kg | 22.20 kg |
| 20 mm | 19.00 kg | 23.00 kg | 25.00 kg | 20.00 kg | 24.00 kg | 37.00 kg |
| 25 mm | 23.75 kg | 28.75 kg | 31.25 kg | 25.00 kg | 30.00 kg | 46.25 kg |
Theoretical weight per m² using the densities listed above.
Go further with this material.
About the rubber sheet weight calculator.
It uses 950 kg/m³ for Natural Rubber (NR), which is an average value. You can type your own density in the Density field if your grade is different.
Yes. Density differs by compound. This calculator uses 950 kg/m³ for natural rubber, 1,150 for EPDM, 1,250 for neoprene, 1,000 for nitrile, 1,200 for silicone and 1,850 for Viton. Pick the compound from the Material list.
Work out the volume in cubic metres from the dimensions, then multiply by the density in kg/m³. For example, a sheet 1000 mm x 1000 mm x 10 mm thick has a volume of 0.01 m³, which at 950 kg/m³ weighs about 9.5 kg.
No. It is a theoretical estimate based on nominal dimensions and average density. Actual weight varies with manufacturing tolerances, grade and fillers.
Yes. Use the quote button beside the result to send us the material, shape, dimensions and quantity, or contact our sales team.
Send us your size and quantity and our team will respond with availability and pricing.